Barco Freya User Manual

219R5910032 /00 Freya
Device name
Description
Actions
Explanation
Clear clear the CPL or SPL in the player
Enable Repeat enable the loop mode in the player
Disable Repeat disable the loop mode in the player
Set Marker set position marker where player can jump to
Jump To Marker change player position to marker position
PROJECTOR Projector
commands
Close Dowser Dowser will close
Open Dowser Dowser will open
Turn Lamp On Lamp will turn on
Turn Lamp Off Lamp will turn off
Execute Macro Macro will be executed
Execute Macro &
check
Macro will be executed and checked if
correctly executed
TCP or UDP
(device)
TCP or UDP
commands
Send Text to send a text command to the device
3
Send Hex to send a hex value to the device
Send Binary to send a binary value to the device
11.3.2 Create a new User Cue
Location & access
Menu: Media server automation > User cues
Level : Administrator, Service technician
How to create
1. While in Configuration > Media sever automation > User cues, click on the Cue menu (reference 1)
located on the top right of the list and select Add (reference 2)
Configuration - Media server automation
3. Special characters or delimiters have to be replaced by the “\” character followed by the corresponding hexadecimal value on two
digits. For instance, the command can send the text “mute=0\0D\0A”, where “\0D” replaces the carriage return (“\r”) and “\0A”
replaces the new line (“\n”).

Barco Freya Specifications

General

Brand	Barco
Model	Freya
Category	Projector
Language	English