R5910032 /00 Freya164
7.8.2 Activating a test pattern using configuration menu
Location & access
Menu: Configuration > Projector > Test Patterns
Level: Administrator, Service technician
How to activate
1. While in Configuration > Projector > Test patterns, find and click on the test pattern you want to activate.
The test patterns is displayed in its expanded form with menu.
Image 7–152
2. Click Activate in the menu.
The Test patterns is activated. Status of the test patterns turns to Active and its name is noticed on top of
the list.
Image 7–153
On the status bar, a icon blinks in green when a test pattern is activated.
7.8.3 Deactivating a test pattern using configuration menu
Location & access
Menu: Configuration > Projector > Test Patterns
Level: Administrator, Service technician
How to deactivate
1. While in Configuration > Projector > Test patterns, find and click on the test pattern you want to deactivate.
The test patterns is displayed in its expanded form with menu.
Configuration - Projector
To Next Page
Loading...
