R5910032 /00 Freya70
Image 6–14
6.4 Power
6.4.1 About Power menu
Location & access
Menu: Control > Projector > Power
Level: Administrator, Service technician, Show manager
Overview
This page groups together three commands related to power modes:
• Switch to ECO mode (reference 1). This will power down the media server and put in standby mode the
projector electronic.
• Reboot ICMP (reference 2), only available if ICMP is present. This will reboot the media server only.
• Full system reboot (reference 3). This will reboot the projector and the media server.
Control - Projector