R5910032 /00 Freya72
Confirmation window is displayed to inform the user of consequences to switch to ECO mode. By
example, this message inform if other users are currently connected or if playback is in progress.
2. Click on the OK to confirm and continue.
The projector switches to ECO mode. All ongoing activities are stopped (playback ...) and all electronics
(including fans, pumps,...) will turn off, except for the wake up service. If you reload the page, you will find
the wake-up page.
Image 6–17 Example of the Eco Mode page in Web Communicator
3. Press Wake up to turn the projector back to Ready state.
6.4.3 Rebooting the media server
Location & access
Menu: Control > Projector > Power
Level: Administrator, Service technician, Show manager
How to reboot the media server
1. While in Control > Projector > Power, click Reboot ICMP.
Image 6–18
2. Click OK to confirm.
The media server will reboot. This operation will take several minutes. Playback and ingest functions are
not available during the reboot.
6.4.4 Full system reboot
Location & access
Menu: Control > Projector > Power
Level: Administrator, Service technician, Show manager
How to reboot the projector
1. While in Control > Projector > Power, click Reboot projector (reference 1).
Control - Projector
To Next Page
Loading...
