123R5910032 /00 Freya
2. While in 3D file editor, check if Disable 3D option (reference 1) is unchecked in order to acceded the
settings.
Image 7–88
3. Put on the glasses and view the screen, covering or closing first one eye and then the other.
Note: Do not adjust the reference delay value with both eyes open.
4. Start e.g. the adjustment with the left eye,
Enter a delay value in µs with the keyboard (reference 2).
or
use the plus button or minus button (reference 3) to adjust the delay (+/- 1 µs) until the white stripes
disappear in the black column.
Image 7–89 Left eye delay test content
5. Continue with the right eye and adjust the delay again.
Configuration - Projector
To Next Page
Loading...
Need help?
General
