Baumuller b maXX 5000 User Manual

Mounting instructions
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
114
of 328
6.3
6.3.1 Mounting with mounting rail
After attaching the mounting rail, push the device from below beneath the upper fastening
bolts (1). Then, tilt the device on the mounting plate (2) and slide onto the mounting rail
(3). Finally, tighten the upper fastening and grounding bolts (4).
Figure 44: Mounting instructions for the BM51XX and BM53XX, with mounting rail
Device BM50XX-S BM517X-S BM519X-S BM532X-S
BM533X-S
A - screws 2 x M5 3 x M5 8 x M5 2 x M5
B - washers 2 x (5.3 x 10) 3 x (5.3 x 10) 4 x (5.3 x 10) 2 x (5.3 x 10)
C - screws n x M5
1)
D - Mounting rail 1000 mm Refer to Accessories and Spare Parts ZMounting rail– as from page 287
1)
Number n depends on the length of the mounting rail

Baumuller b maXX 5000 Specifications

General

Brand	Baumuller
Model	b maXX 5000
Category	Servo Drives
Language	English