Baumuller b maXX 5000 User Manual

Monitoring functions
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
228
of 328
10.2
10.2 Monitoring functions
Monitoring function Warning/error
Warning Error Adjustable threshold Adjustable reaction Reaction inhibit pulses
Power supply voltage
5)
Power supply undervoltage X
7)
X - - X
Power supply overvoltage X
7)
X - - X
Phase monitoring
5)
Phase failure X
7)
X - - X
Power supply failure X
7)
X X
7)
- X
1)
Power supply frequency too high 
or too low
6)
X - - - -
Power supply synchronization lost
6)
- X - - X
No mains synchronization possible
6)
- X - - X
Ground fault Fault current to ground
7)
- X - - X
Overcurrent Motor overcurrent
6)7)
- X - - X
Power supply/DC link overcurrent
5)7)
- X - - X
Power supply overcurrent
8)
- X - - X
Charging
9)
Time out charging - X - - X
Short-circuit in the DC link - X - - X
Discharging
9)
Time out quick discharge - X - - X
Power supply current during 
discharging
- X - - X
DC link DC link overvoltage - X - - X
DC link relative undervoltage X
7)
X
8)
- - X
8)
DC link set value too low
5)6)
X - - - X
1)
Pulses are inhibited after a adjustable time period (not provided for BM51XX).
2)
Only if KTY/PT1000 sensors are used
3)
Threshold adjustable
4)
Reaction adjustable
5)
Not provided for BM53XX
6)
Not provided for BM50XX
7)
Not provided for BM51XX
8)
Only provided for BM51XX
9)
Not processed by BM51XX, only a message for the axis units.
X: Implemented
-: Not possible

Baumuller b maXX 5000 Specifications

General

Brand	Baumuller
Model	b maXX 5000
Category	Servo Drives
Language	English