Safety
Instruction handbook bmaXX 5000
Document No.: 5.09021.19
19
of 346
2
2.5 Responsibility of the operating company
The device is used in commercial areas. Thus, the proprietor of the device is subject to
the legal work safety regulations.
Along with the notes on work safety in these instruction handbook, the safety, accident
prevention and environmental protection regulations valid for the area of application of
this device must be complied with. Whereby:
m The operating company must inform himself about the applicable work health and safe-
ty regulations and ascertain, in a hazard assessment, any additional hazards that could
arise from the special working conditions in the use area of the device. These must
then be implemented in the form of instruction handbook for operation of the device.
m These instruction handbook must be kept accessible to personnel working with the de-
vice at all times in the immediate vicinity of the device.
m The specifications of the instruction handbook must be adhered to completely and
without exception.
m The device may only be operated in a technically faultless and operationally safe con-
dition.
2.6 Protective devices
IP code
BM50XX IP 20
BM517X IP 20, with a contact-isolated connection in accordance
with IP 20, otherwise IP 10.
BM519X IP 00
BM5323, BM5325 IP 20
BM5326, BM5327, BM5328,
BM5331, BM5332, BM5333
IP 10
BM5334, BM5335 IP 20, with a contact-isolated connection in accordance
with IP 20, otherwise IP 10.
BM537X IP 00
DANGER!
Risk of fatal injury from electrical current!
There is an immediate risk of fatal injury if live electrical parts are contacted.
Therefore:
m The device must be in operated inside of a control cabinet that provides protection
against direct contact of the devices and at least meets the requirements of
EN 61800-5-1, Chapter 4.2.3.3.
m Fault protection according EN 60204-1:2018, section 6.3 is fulfilled by measures
of preventing touch voltages.
To Next Page
Loading...
