Baumuller b maXX 5000 User Manual

293
of 328
Instruction handbook b maXX 5000
Document No.: 5.09021.16
13DISPOSAL
NOTE!
Baumüller products are not subject to the scop
e of application of the EU's Waste
Electrical and Electronic Equipment Directive (WEEE, 2012/19/EU). Hence,
Baumüller is not obligated to bear any costs for taking back and disposing of old de-
vices.
13.1 Safety regulations
DANGER!
Risk of fatal injury from electrical current!
Stored electric charge.
Discharge time of the modular system = discha
rge time of the device with the longest
DC link discharge time in the modular system.
Refer to ZElectrical da
ta– as from page 58.
Therefore:
m D
o not touch before taking into account the discharge time of the capacitors and
electrically live parts.
m He
ed corresponding notes on the equipment.
m If
additional capacitors are connected to the intermediate circuit, the intermediate
circuit discharge can take a much longer time. In this case, the necessary waiting
period must itself be determined or a measurement made as to whether the equip-
ment is de-energized. This discharge time
must be posted, together with an IEC
60417-5036 (2002-10) warning symbol, on a clearly visible location of the control
cabinet.

Baumuller b maXX 5000 Specifications

General

Brand	Baumuller
Model	b maXX 5000
Category	Servo Drives
Language	English