EasyManuals Logo

Baumuller b maXX 5000 User Manual

Baumuller b maXX 5000
330 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Special hazards
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
22
of 328
2.9
2.9 Special hazards
In the following section, the remaining marginal risks will be stated that have been iden-
tified as a result of the hazard
analysis.
Observe the safety notes listed here and the warning notes in the further chapters of this
Ins
truction handbook to reduce health risks and dangerous situations.
Electrical current
DANGER!
Risk of fatal injury from electrical current!
There is an immediate risk of fatal injury if live
electrical parts are contacted. Damage
to the insulation or individual components can be life-threatening.
Therefore:
m Switch
off the electrical power immediately in case of damage to the power supply
insulation.
m Only
allow work on the electrical system to be performed by qualified personnel.
m Switch
off the current when any kind of work is being performed on the electrical
system and ensure safety before switching on again.
Danger from re-
sidual energy
DANGER!
Risk of fatal injury from electrical current!
Stored electric charge.
Discharge time of the rack system = discharge time
of the device with the longest DC
link discharge time in the rack system.
Refer to ZElec
trical dataas from page 58.
Therefore:
m Do no
t touch electrically live parts before taking into account the discharge time of
the capacitors.
m Pa
y attention to the corresponding notes on the device.
m If ad
ditional capacitors are connected to the DC link, the DC link discharge can
take a much longer time. In this case, the necessary waiting period must itself be
determined or a measurement made as to whether the equipment is de-energized.
This discharge time must be posted, together with an IEC 60417-5036 (2002-10)
warning symbol, on a clearly visible location of the control cabinet.

Table of Contents

Other manuals for Baumuller b maXX 5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Baumuller b maXX 5000 and is the answer not in the manual?

Baumuller b maXX 5000 Specifications

General IconGeneral
BrandBaumuller
Modelb maXX 5000
CategoryServo Drives
LanguageEnglish

Related product manuals