Baumuller b maXX 5000 User Manual

Shutdown, Storage
Instruction handbook b maXX 5000
Document No.: 5.09021.16
291
of 328
12
1 Secure the device against falling off/out.
2 Lo
osen all mechanical connections.
3 Lift
the device out of the control cabinet.
4 Store
the device in a suitable packing.
5 At
transportation pay attention to, that the device is not damaged by wrong storage or
severe shocks, also see ZWha
t to observe when transporting– on page 105.
In case you want to dispose the device, additional data is available in chapter ZDisp
osal–
as from page 293.
12.5 Storage conditions
The device is maintenance-free. If you keep to the environmental conditions during the
entire period of storage, you can assume, that the device will not be damaged. In case
the environmental conditions during storage are not kept, you should assume that the de-
vice is damaged after storage.
NOTICE!
Property damage because of incorrect storage conditions
Incorrect storage can damage/destroy the device.
Therefore:
Assure, that the environmental conditions are kept during the entire period of storage:
m C
limatic category 1K4
m Tem
perature range -25 °C to +55 °C
NOTICE!
Recommissioning without forming of the capacitors.
From six months storage period on, the cap
acitors are destroyed during commission-
ing, if they are not formed beforehand
m R
eform the DC link capacitors:
n by su
pplying the device ready-to-operate for at least one hour with supply volt-
age
n bu
t do not enable pulses during this time.
m Co
nsider, that it is imperative, to connect the accordingly prescribed line commu-
tating chokes for this forming procedure
. Devices, where no line commutating
chokes is necessary can directly be supplied with mains voltage.

Baumuller b maXX 5000 Specifications

General

Brand	Baumuller
Model	b maXX 5000
Category	Servo Drives
Language	English