Baumuller b maXX 5000 User Manual

WARNING!
Danger due to faulty installation and
initial commissioning!
Installation and initial comm
issioning require qualified personnel with adequate expe-
rience. Faulty installation can lead to life-threa
tening situations or substantial material
damage.
Therefore:
m Only allow installation and initia
l commissioning to be performed by employees of
the manufacturer or by other qualified personnel.
DANGER!
Risk of fatal injury from electrical current!
Inevitably, when operating this electrical device, ce
rtain parts of it are energized with
hazardous voltage.
Therefore:
m Pa
y heed to areas on the device that could be dangerous during the electrical in-
stallation.
m Pay
heed to areas on the device that could still be electrically energized after op-
eration.
Figure 52: Hazard areas during electrical installation
DANGER!
Risk of fatal injury from electrical current!
The devices b maXX 50
00 are not conform with the automatic disconnection of the
supply unit from the power supply system in case of an insulation fault, required in
EN60204-1 (section 6.3.3).
Therefore the plant operator is responsible for the installation of an appropriate insu-
lation monitoring device, separating the devices b maXX 500
0 from the power supply
system to prevent dangerous touch voltages in case of an insulation fault.
Safety notes
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
124
of 328
7.1

Baumuller b maXX 5000 Specifications

General

Brand	Baumuller
Model	b maXX 5000
Category	Servo Drives
Language	English