Usage for the intended purpose
Instruction handbook bmaXX 5000
Document No.: 5.09021.19 Baumüller Nürnberg GmbH
16
of 346
2.3
WARNING!
Danger arising from usage for an unintended purpose!
Any usage that goes beyond the intended purpose and/or any non-compliant use of
the device can lead to dangerous situations.
Therefore:
m Only use the device compliant with its intended purpose.
m Observe all specifications of these instruction handbook.
m Ensure that only qualified personnel work with/on this device.
m When configuring, ensure that the device is always operated within its specifica-
tions.
m Mount the device on a wall that can sufficiently bear the load.
m The device must always be operated within a control cabinet.
m Ensure that the power supply complies with the stipulated specifications.
m The device may only be operated in a technically flawless condition.
m Only operate the device in combination with components approved by Baumüller
Nürnberg GmbH.
m The device has been developed in such a manner that it fulfills the requirements
of the category C3 according to IEC 61800-3:2012.
m The device is not intended to be connected to the public mains. To operate the de-
vice in primary surroundings of the category C2/C1 (residential, business and com-
mercial areas, directly on a public low-voltage mains without an intermediate
transformer), special measures to reduce the transient emissions (line-internal and
radiated) must be provided for and certifiable by the system builder. Otherwise,
EMC interference could occur without such additional measures.
To Next Page
Loading...
