Uni-Probe LB 490
BERTHOLD TECHNOLOGIES GmbH & Co. KG
2 – 133
Volume 2 1 System Description
2
1.6 Detector Codes
The code numbers serve for automatic setting of the high voltage
operation point and have already been set by the manufacturer.
You only have to verify and, if necessary, correct it when the elec-
tronics has been replaced.
Detector type Scintillator size Detector code
Point detectors 38477-X1X
38477-X2X
47678-X1X
47678-X1X
500XX-XXX
50x50 NaI 0
Rod detectors 38477-X3X
47678-X3X
500XX-X3X
500mm 22
38477-X5X
47678-X5X
500XX-X5X
1000mm 13
38477-X7X
47678-X7X
500XX-X7X
1500mm 10
38477-X9X
47678-X9X
500XX-X9X
2000mm 10
Super-Sens 53214-XXX 150x150mm 23
Tower-Sens 50250-XXX 1000mm 31
50250-XXX 2000mm 32
50250-XXX 3000mm 33
50250-XXX 4000mm 34
50250-XXX 5000mm 35
50250-XXX 6000mm 36
50250-XXX 7000mm 37
50250-XXX 8000mm 38
To Next Page
