Uni-Probe LB 490
BERTHOLD TECHNOLOGIES GmbH & Co. KG
3 – 313
Volume 3 Menu Structure
3
2.14 SETUP
Upon delivery of the instrument, access to all levels is possible
without password.
If access to one of the following levels is denied, it may be granted
only by entering the correct password (see explanation on pass-
word on page 3–369).
1 CONFIGURATION
Shows the configuration parameters.
2 CALIBRATION I/O
Shows the parameters for calibration, outputs and the relays.
3 SERVICE
Shows the test and diagnosis parameters.
4 CHANGE PASSWORD
Changes the password. How to define the password is described in
detail on page 3–369.
2.15 CONFIGURATION
1 GENERAL DATA
Shows the general parameters.
2 SYSTEM PARAMETER
Shows the system parameters.
3 MEASURE PARAMETER
Shows the measurement parameters.
To Next Page
Loading...
