Uni-Probe LB 490
BERTHOLD TECHNOLOGIES GmbH & Co. KG
2 – 141
Volume 2 2 Installation
2
2.1 Transport to the Installation Site
Risk of injury!
– Never step under hovering loads while unloading heavy system
parts!
– Only use tested lifting equipment matching the transport
weights.
– Maintain adequate safety margins.
– Wear hard hat and safety shoes.
Transportation may also be carried out by construction site person-
nel with experience in transporting heavy components. However,
this construction site personnel has to be supervised by authorized
persons; the Radiation Safety Officer has to be involved in any
work relating to the transportation and installation of sources.
2.1.1 Transporting Detector and Evaluation Unit
Risk of damage!
System parts may get damaged during transport.
Transport the detector and evaluation unit in the original packaging
and protect the parts from vibrations.
2.1.2 Transport Shielding with Source
Please observe the Radiation Protection Guidelines. Radioactive
substances may be transported on public traffic routes only by per-
sons in possession of the proper transport license!
Hazards due to nuclear radiation!
A source may be transported only in its shielding. The shielding
must be closed during transportation and installation.
The shielding with the source inside can be lifted onto a palette by
a fork-lift and transported to its destination. If the system parts are
provided with eyebolts for transportation, they have to be used for
lifting, unless the system parts are transported in their original
packing.
2.1.3 Temporary Storage of Sources
The operator has to take suitable provisions for temporary storage
of sources at the place of installation between the period from
source delivery to the start of the installation work.
To Next Page
Loading...
