Uni-Probe LB 490
BERTHOLD TECHNOLOGIES GmbH & Co. KG
1 – 25
Volume 1 3 Qualification of Personnel
1
3 Qualification of Personnel
Reference to the qualification of personnel who can be entrusted
with the various installation and maintenance tasks is made at var-
ious points in this User’s Manual.
We distinguished three groups:
1. Specialized persons, see section3.1.
2. Qualified persons, see section 3.2.
3. Authorized persons, see section 3.3.
The following sections explain the meaning of these terms and the
prerequisites for the respective group of people.
At least specialized persons are required for all work on and with
the Uni-Probe LB 490, under the guidance of a qualified or autho-
rized person.
3.1 Specialized Persons
Specialized persons are e.g. technicians or welders who can carry
out various tasks in transportation, assembly and installation of the
Uni-Probe LB 490 under the supervision of an authorized person.
This may also be construction site personnel. The respective per-
sons must have experience in the transportation and assembly of
heavy components.
For explosion-protected devices, these persons must in addition
have knowledge on how to handle these devices, e.g. the devices
must not be exposed to mechanic damage (blows etc.).
Specialized persons must always be guided by at least one qualified
person.
The Radiation Safety Officer has to be involved whenever radioac-
tive substances are being handled.
To Next Page
Loading...
