38477BA2B
1 – 24 25.5.09
2 Use and Function Volume 1
Explosion hazard!
Spare parts for detectors used in hazardous areas may only be
installed by BERTHOLD TECHNOLOGIES service staff or by persons
authorized by BERTHOLD TECHNOLOGIES. If this is not possible,
you have to replace the complete detector or return it to the man-
ufacturer for repair.
Use only fuses that match the rating specified by BERTHOLD
TECHNOLOGIES.
Parameter settings Never change the parameter settings without a full knowledge of
this User’s Manual, as well as a full knowledge of the behavior of
the connected controller and the possible influence on the operat-
ing process to be controlled.
This measuring system employs radioactive sources. The radiation
protection guidelines in this User's Manual and the applicable stat-
utory regulations have to be observed strictly; see also chapter
"6 Radiation Protection", on page 1–31.
To Next Page
Loading...
