BERTHOLD TECHNOLOGIES Uni-Probe LB 490 - View Parameter; Process Variables

Uni-Probe LB 490
BERTHOLD TECHNOLOGIES GmbH & Co. KG
3 – 305
Volume 3 Menu Structure
3
2.6 VIEW PARAMETER
1 PROCESS VARIABLES
Leads to the major measurement parameters.
2 STATUS CONTROL
Shows the values of the current status and the instrument history.
2.7 PROCESS VARIABLES
1 TIME CONST
Shows the current time constant.
Tip
For further information please refer to page 3–317.
2 UP. RANGE
Level value of the upper range limit (20 mA) for the current output.
3 LO. RANGE
Level value of the lower range limit (4 mA) for the current output.
4 SHOW CAL. CURVE
Shows the calibration points.