38477BA2B
2 – 198 25.5.09
3 Electrical Installation Volume 2
3.5.3 Terminal Box
Figure 3-8 Terminal box
Use the terminal box (ID no. 49546) in order to extend the fac-
tory-mounted 20m long current signal cable to the next distribu-
tion point. The current output signal and the screen have to be
looped via the terminal box.
The wires for the current signal are connected to the blue terminals
1 and 2. The screen is connected to the blue terminal 3. The cable
gland has a clamping range for cable diameters 5 … 10mm.
To Next Page
