Uni-Probe LB 490
BERTHOLD TECHNOLOGIES GmbH & Co. KG
1 – 39
Volume 1 6 Radiation Protection
1
Guard and mark controlled areas.
Secure source and shielding.
Document the incident and assess possible radiation exposure
of personnel.
In case the source capsule is damaged, the following points have to
be considered:
Avoid contamination.
Handle source with tools (e.g. pincers or tweezers) and put
both (source and tool) in a plastic bag.
Stay behind auxiliary shielding (e.g. concrete, steel, or lead
plate).
Check if vicinity is free of contamination.
Secure radioactive waste properly (deposit at governmental
collection site or return to manufacturer).
If the source is leaking and the dose rate might possibly be
exceeded, the regulatory authority (e.g. trade board) has to be
notified immediately.
In case of an accident or malfunction or any other event which
affects the safety, the regulatory authority has to be informed and
also, if necessary, the authority in charge of public safety. Please
contact BERTHOLD TECHNOLOGIES if you need any further infor-
mation.
To Next Page
Loading...
