Chapter 4 Everest Software
Plate Setup Panel
The Plate Setup panel contains Plate Settings on the left and the selected media type on the right.
For information on controls in the Plate Settings area, see Plate Settings Controls on page 179. For
information on controls in the Plate Setup area that are not covered in this chapter, see Position
Settings Controls on page 193.
Selected Media Type
The selected media type pane allows you to program each well or group of wells with a set of run
conditions. The next figure shows the currently selected well highlighted with a red border.
72 | ZE5 Cell Analyzer and Everest Software
To Next Page
Loading...
