Bosch Rexroth Tightening System 350 - Page 428

428/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
6.7.7.18 tJob result messages
MID 0554 Last job results data subscription
MID 0555 Upload last job results data response
Sent by:
superordinate computer
Job results data subscription
Note: -
Revision: see MID 0555
Data field: is empty, 0 bytes
Possible responses MID Error no. Comment
Command accepted 0005 –
Command error 0004 09 Activation for the last job result already available
Sent by: Tightening controller
Upload last job results data response
Note: -
Revision:
001 (supported by Rexroth OP and Rexroth OP-BMW)
Data field:
Total data length: 29 ASCII characters
Possible response MID Error no. Comment
Last job results data acknowledgement 0556 –
Table 6–121: MID 0555 revision 001
Parameter Comments Bytes
Job number Job number
The value consists of three ASCII characters.
ID 01
2
Value range 000 – 999
Presetting -
Example:
Job number 001
Value 001
3
Job evaluation Evaluation of the job.
–0: Job NOK
–1: Job OK
The value consists of one ASCII character.
ID 02
2
Value range 0–1
Presetting -
Example:
Job OK 1
Value 1
1
Time stamp Date and time of the tightening.
The value consists of 19 ASCII characters in
YYYY-MM-DD:HH:MM:SS format.
ID 03
2
Value range 0 – 9, "-" and ":"
Presetting -
Example:
Time stamp 2015-01-12:14:43:57
Value 2015-01-12:14:43:57
19
Data length
29