144
IFS 125M User Manual Bruker Optik GmbH
Web Interface 8
To a large extent the Measurement Menus page is identical to the OPUS Measurement
dialog (figure
8.3a and 8.3b).
After clicking the Start Measurement button (A in figure 8.3b), the Measurement Status
page opens. This page displays the progress of the data acquisition (e.g. remaining
scans, remaining time) and the name of the currently created file. In addition, all errors
occurring during the measurement are displayed in form of an error message as well.
The created interferogram files are stored in an internal buffer of the electronics and may
be downloaded later (see List of Result Data Files). However, once the internal buffer is
full, information will be lost. OPUS performs measurements employing the same mecha
-
nism, i.e. you will see the interferogram files requested from OPUS in the list of data files
as well.
The Messages page lists all messages (errors, warnings etc.) that are also displayed on
the Measurement Status and Direct Command Entry pages. Clicking the Auto-Reload
button automatically updates the page every second. Thus, you can follow the mes
-
sages almost in real time, without repeatedly clicking the Reload button of the web
browser.
Figure 8.3a: OPUS Measurement dialog Figure 8.3b: Measurement command
(spectrometer diagnostics page)
A
To Next Page
Loading...
Need help?
General
