Bruker IFS 125M - Page 152

152
IFS 125M User Manual Bruker Optik GmbH
Web Interface 8
8.3.2.2 Source diagnostics page
Definition
A
Status message
B Currently installed source
C Current state of source, either:
•On
•Off
D Current reading of the source operating hour meter
➣ Compare the total run time displayed with the spec-
ified average service lifetime of the IR source.
E Date when the source was first put into operation
Table 8.8: Components of source diagnostics page
Figure 8.9: Source diagnostics page
A
B
E
C
D