Canon LBP6310dn - Registering the Paper Size

07K5-02X
This printer's paper drawer cannot automatically detect the paper size. Therefore, you need to register the size of the
loaded paper.
Register the paper size using the following procedure.
NOTE
When registering a paper size
As you cannot register paper size while printing is in progress, make sure that the printer is idle before registering the
paper size.
You can register paper size only while one of the following messages is displayed.
<Specified Paper Different from Set Paper>
<Out of Paper>
1
Click [ ] in the Windows task tray, and then select the printer name.
2

3
Register the paper size.
(1) Select the size of the paper loaded in the paper drawer.
Drawer 1: The paper drawer supplied with the printer unit
Drawer 2: The paper drawer of the optional paper feeder
(2) Click [OK].
For details on the basic printing procedure, see "Basic Printing Procedure."
If printing custom size paper, you need to register the custom paper size in the printer driver previously.
Registering the Paper Size
㻝㻠㻡㻌㻛㻌㻠㻡㻞