Canon LBP6310dn - Setting the Administrator Password

07K5-06L
Only the administrator (user who knows the password) can configure the settings or perform the operations related to the
printer management by setting the administrator password.
Also, the administrator password can be changed anytime.
This section describes the procedure for specifying the settings using the Remote UI.
In the Remote UI, you can specify the settings by accessing the printer from a Web browser via a network.
NOTE
When specifying the settings using software other than the Remote UI
You can also specify the settings using the following software.
"FTP Client"
You can specify the settings by accessing the FTP server of the printer using Command Prompt.
"NetSpot Device Installer"
You can specify the settings using the Canon software, NetSpot Device Installer, in the supplied CD-ROM.
1
Start the Remote UI, and then log in as Administrator.
"Starting the Remote UI"
2
Select [Information] from the [Device Manager] menu.
3
Click [Change] under [Security].
Setting the Administrator Password
㻟㻟㻣㻌㻛㻌㻠㻡㻞