07K5-088
Perform one of the following solutions according to the cause.
<Cause 1> Damp paper is used.
Solution 1
Replace the paper with new paper in an unopened package.
"Precautions for Paper"
Solution 2
Perform the following procedure in the printer driver when you are using plain paper (60 to 90 g/m
2
).
1. Display the [Paper Source] sheet.
2. Set [Paper Type] to [Plain Paper L].
Solution 3
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings B6].
If the problem is not solved, specify [Special Settings B5].
Normally, use the printer with [Special Print Mode] set to [Off]. Specify [Special Settings B6] or
[Special Settings B5] only if the described problems occur.
If you specify [Special Settings B6], printing speed drops.
If you specify [Special Settings B5], printing speed drops compared to when specifying [Special
Settings B6].
<Cause 2> Appropriate paper is not being used.
Solution
Replace the paper with that which can be used with this printer.
"Usable Paper"
<Cause 3> Paper that curls easily is output to the output tray.
Solution
Switch to the sub-output tray when printing transparencies, labels, or envelopes.
"Paper Loading and Output"
Paper Curls
㻠㻝㻥㻌㻛㻌㻠㻡㻞
To Next Page
Loading...
