Canon LBP6310dn - The Printer Takes a Long Time to Start the Print Job

07K5-07A
<Cause 1> The printer cools down itself so that the print quality is maintained (especially
after paper with a narrower width is printed).
Solution
Please wait a moment. The printer cools down the inside automatically.
Printing resumes after cooling down the inside.
<Cause 2> This problem may occur in some applications depending on the processing type of
the print data.
Solution
Performing the following procedure in the printer driver may be able to solve the problem.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Change the [EMF Spooling] setting.
When [EMF Spooling] is set to [On], the Printer Status Window may not be displayed automatically.
In this case, display it manually.
(For details on methods for displaying the Printer Status Window, see "Printer Status Window.")
The Printer Takes a Long Time to Start the Print Job
㻟㻣㻥㻌㻛㻌㻠㻡㻞