07K5-012
The printer driver is software required for printing with this printer.
The following system environment is required to use the printer driver.
Operating System
Windows XP Professional or Home Edition
Windows XP Professional x64 Edition
Windows Vista (32-bit or 64-bit version)
Windows 7 (32-bit or 64-bit version)
Windows Server 2003
Windows Server 2003 x64 Editions
Windows Server 2008 (32-bit or 64-bit version)
For details on the latest status of the supported operating systems and Service Pack, see the Canon Web site
(http://www.canon.com/).
System Requirements (minimum required)
Windows XP, and Server 2003 Windows Vista, 7, and Server 2008
CPU 300 MHz or more
CPU and RAM conforming to recommended system
requirements for Windows Vista, 7, or Server 2008
Available memory (RAM) 128 MB or more
Available hard disk space Free hard disk space displayed on the installation screen of the printer driver
Recommended System Requirements
Windows XP, and Server 2003 Windows Vista, 7, and Server 2008
CPU 1.2 GHz or more
CPU and RAM conforming to recommended system
requirements for Windows Vista, 7, or Server 2008
Available memory
(RAM)
256 MB or more
Interface
When connecting with USB
Hi-Speed USB/USB
When connecting to a network
Connector: 10BASE-T or 100BASE-TX
Protocol: TCP/IP
NOTE
About available memory
The actual amount of available memory varies depending on the system configuration of your computer and the
application software currently in use.
In any of the above system environments, print quality is not guaranteed.
About unidirectional communication equipment
The printer performs bi-directional communication. Operation of the printer when connected via unidirectional
communication equipment is not tested, and as a result, Canon cannot guarantee printer operation if the printer is
connected using unidirectional print servers, USB hubs or switching devices.
System Requirements for Printing
㻠㻢㻌㻛㻌㻠㻡㻞
To Next Page
Loading...
