07K5-085
When the Alarm Indicator Is On
A problem is occurring in the printer, and the message <Service Error> appears in the Printer Status Window. Perform the
following procedure to cycle the power of the printer.
1
Turn the printer OFF, wait for 10 seconds or longer, and then turn it ON again.
If the message does not reappear, the printer is ready.
If the message reappears, you need to request service.
Follow the procedure below, and then contact your local authorized Canon dealer to request service.
2
Note down the error code displayed in the Printer Status Window.
The Alarm Indicator Is On/Blinking
㻠㻜㻥㻌㻛㻌㻠㻡㻞
To Next Page
Loading...
