Canon LBP6310dn - Smudge Marks of Spattering Toner Appear Around the Text or Patterns

07K5-08K
Perform one of the following solutions according to the cause.
<Cause 1> Appropriate paper is not being used.
Solution
Replace the paper with that which can be used with this printer.
"Usable Paper"
<Cause 2> Depending on the paper type (especially for heavy paper) or the operating
environment (especially in a low-humidity environment), smudge marks of spattering toner
may appear.
Solution
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings A5].
Normally, use the printer with [Special Print Mode] set to [Off]. Specify [Special Settings A5] only if
the described problems occur.
Selecting [Special Settings A5] may deteriorate print quality depending on the paper type
(especially for thin paper) or the operating environment (especially in a high-humidity environment).
In this case, do not specify [Special Settings A5].
Smudge Marks of Spattering Toner Appear around the Text or Patterns
㻠㻞㻣㻌㻛㻌㻠㻡㻞