07K5-052
This section describes the procedure for using NetSpot Device Installer without installing it.
For details on the procedure for installing NetSpot Device Installer, see "Installing NetSpot Device Installer."
1
Make sure that the LAN cable is connected properly, and the printer is turned ON.
"Connecting the Printer and Computer"
2
Turn the computer on, and then log on to Windows as a user with administrative rights.
3
Insert the supplied CD-ROM "User Software" into the CD-ROM drive of your computer.
4
Click [Additional Software Programs].
If the above screen does not appear
"Basic Operations/Various Information for Windows"
If the [AutoPlay] dialog box appears
Click [Run AUTORUN.EXE].
Setting the IP Address Using NetSpot Device Installer
㻞㻟㻡㻌㻛㻌㻠㻡㻞
To Next Page
Loading...
