07K5-095
Perform the following procedure.
<Cause> This problem may occur in some applications depending on the processing type of
the print data.
Solution
Performing the following procedure in the printer driver may be able to solve the problem.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Change the [EMF Spooling] setting.
When [EMF Spooling] is set to [On], the Printer Status Window may not be displayed automatically.
In this case, display it manually.
(For details on methods for displaying the Printer Status Window, see "Printer Status Window.")
The Printout Is Different from What Is Displayed on Screen
㻠㻠㻜㻌㻛㻌㻠㻡㻞
To Next Page
Loading...
