Updating Firmware
<Cause> The firmware is being updated.
Solution Please wait a moment.
Front Cover Open
<Cause> The front cover is open.
Solution Close the front cover.
Insufficient Memory
<Cause> The memory on the computer or server is insufficient.
Solution Exit unnecessary applications.
Out of Paper
<Cause> The paper to be printed is not loaded in a paper source.
Solution 1
Load the indicated paper in the paper source.
"Loading Paper in the Paper Drawer"
"Loading Paper in the Multi-purpose Tray"
Solution 2
If the indicated paper is loaded in the paper drawer, register the paper size again.
"Registering the Paper Size"
Solution 3
Clicking [
] (Resolve Error) is enabled and clicked, the printer prints on the paper currently loaded in
the multi-purpose tray.
Specified Paper Different from Set Paper
If the message <Specified Paper Different from Set Paper> appears, blank paper may be output.
<Cause> Paper of the size different from that of the job is loaded.
Solution 1
Load the indicated paper in the paper source.
"Loading Paper in the Paper Drawer"
"Loading Paper in the Multi-purpose Tray"
Solution 2
If the indicated paper is loaded in the paper drawer, register the paper size again.
"Registering the Paper Size"
Solution 3
Clicking [
] (Resolve Error) allows the printer to print on the currently loaded paper.
Start Cleaning
<Cause> The printer is waiting for that the cleaning page is loaded.
Solution
Load the cleaning page in the multi-purpose tray with the printed side facing up.
"Cleaning the Inside of the Printer"
㻠㻝㻡㻌㻛㻌㻠㻡㻞
To Next Page
Loading...
