Start: Month, Week, Day
End: Month, Week, Day
If a key is not pressed for a specified period of time, the screen and the settings are initialized to display the default screen (Auto
Reset). Specify the interval at which the Auto Reset is performed. Select <0> to disable the Auto Reset function. The Auto Reset is not
performed in the following cases:
The setting menu is displayed.
The machine is processing data, such as when printing documents or sending or receiving faxes.
An error message is displayed and the error indicator is blinking (However, Auto Reset is performed when the error does not prevent
the user from continuing to use a function.)
0 (Auto Reset is disabled.)
1 to 2
to 9 (min.)
NOTE
The screen displayed after the Auto Reset is performed can be selected in <Function After Auto Reset>.
Select whether to return the display to the default screen after the Auto Reset is performed. If <Default Function> is selected, the main
screen of the function selected in <Default Screen after Startup/Restoration> is displayed (
Default Screen after
Startup/Restoration). If <Selected Function> is selected, the display returns to the main screen of the function that was selected.
Default Function
Selected Function
If the machine has not been operated or has had no data to process for a specified period of time, the machine enters sleep mode to
save energy consumption (Auto Sleep). Specify the period of time after which auto sleep is performed. Auto Sleep is not performed when
<Timer Settings> <Date/Time Settings> <Daylight Saving Time Settings> Select
a month and day
<Apply>
Auto Reset Time
<Timer
Settings>
<Auto Reset
Time>
Set the
Auto
Reset
time
<Apply> Function After Auto Reset
<Timer
Settings>
<Auto Reset
Time>
Select <Default Function>
or
<Selected
Function>
Auto Sleep Time
㻠㻤㻥㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
