Cisco Catalyst 4500 Series - Page 1784

Index
IN-14
Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide
OL_28731-01
hello time (STP)
configuring
21-17
high CPU due to ACLs, troubleshooting 52-6
history
CLI
2-4
history table, level and number of syslog messages 59-9
hop counts
configuring MST bridges
21-28
host
limit on dynamic port
16-28
host modes, MACsec 44-3
host ports
kinds of
43-4
host presence CDP message 45-8
Hot Standby Routing Protocol
See HSRP
HSRP
description
1-16
HSRP, introduction 1-16
hw-module module num power command 13-22
I
ICMP
enabling
9-12
ping 9-7
running IP traceroute 9-9
time exceeded messages 9-9
ICMP Echo operation
configuring
67-11
IP SLAs 67-11
i command 72-3
IDS
using with SPAN and RSPAN
56-2
IEEE 802.1ag 64-2
IEEE 802.1s
See MST
IEEE 802.1w
See MST
IEEE 802.3ad
See LACP
IGMP
configurable-leave timer
26-4
description 36-3
enabling 36-14
explicit host tracking 26-4
immediate-leave processing 26-3
leave processing, enabling 27-8
overview 26-2
report suppression
disabling
27-10
IGMP filtering
configuring
26-31
default configuration 26-30
described 26-30
monitoring 26-34
IGMP groups
setting the maximum number
26-33
IGMP Immediate Leave
configuration guidelines
26-9
IGMP profile
applying
26-32
configuration mode 26-31
configuring 26-31
IGMP Snooping
configure
leave timer
26-9
configuring
Learning Methods
26-7
static connection to a multicast router 26-8
configuring host statically 26-11
enabling
Immediate-Leave processing
explicit host tracking
26-11
suppressing multicast flooding 26-12
IGMP snooping
configuration guidelines
26-5
default configuration 27-5, 27-6