Control Techniques unidrive sp

Parameter
structure
Keypad and
display
Parameter
x.00
Parameter
description format
Advanced parameter
descriptions
Macros
Serial comms
protocol
Electronic
nameplate
Performance
Feature look-
up table
Menu 19
Unidrive SP Advanced User Guide 315
Issue Number: 7 www.controltechniques.com
5.18 Menu 19: Application menu 2
Menu 19 contains parameters that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
application Solutions Modules. The read write parameters in this menu can be saved in the drive.
19.01 Application menu 2 power-down saved integer
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range
Open-loop, Closed-loop vector, Servo,
Regen
-32,768 to 32,767
Default
Open-loop, Closed-loop vector, Servo,
Regen
0
Update rate N/A
19.02 to 19.10 Application menu 2 read-only integer
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1
Range
Open-loop, Closed-loop vector, Servo,
Regen
-32,768 to 32,767
Default
Open-loop, Closed-loop vector, Servo,
Regen
0
Update rate N/A
19.11 to 19.30 Application menu 2 read-write integer
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
11
Range
Open-loop, Closed-loop vector, Servo,
Regen
-32,768 to 32,767
Default
Open-loop, Closed-loop vector, Servo,
Regen
0
Update rate N/A
19.31 to 19.50 Application menu 2 read-write bit
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Default
Open-loop, Closed-loop vector, Servo,
Regen
0
Update rate N/A
http://nicontrols.com