Control Techniques unidrive sp User Manual

Menu 20
Parameter
structure
Keypad and
display
Parameter
x.00
Parameter
description format
Advanced parameter
descriptions
Macros
Serial comms
protocol
Electronic
nameplate
Performance
Feature look-
up table
316 Unidrive SP Advanced User Guide
www.controltechniques.com Issue Number: 7
5.19 Menu 20: Application menu 3
Menu 20 contains parameters that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
application Solutions Modules. The read write parameters in this menu cannot be saved in the drive.
20.01 to 20.20 Application menu 3 read-write integer
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
11
Range
Open-loop, Closed-loop vector, Servo,
Regen
-32,768 to 32,767
Default
Open-loop, Closed-loop vector, Servo,
Regen
0
Update rate N/A
20.21 to 20.40 Application menu 3 read-write long integer
Drive modes Open-loop, Closed-loop vector, Servo, Regen
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
11
Range
Open-loop, Closed-loop vector, Servo,
Regen
-2
31
to 2
31
-1
Default
Open-loop, Closed-loop vector, Servo,
Regen
0
Update rate N/A
http://nicontrols.com

Control Techniques unidrive sp Specifications

General

Brand	Control Techniques
Model	unidrive sp
Category	Controller
Language	English