EasyManuals Logo

Dalsa Genie Nano Series User Manual

Dalsa Genie Nano Series
327 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
152 Operational Reference Nano Series GigE Vision Camera
Display Name Feature & Values Description Version Model Notes
Defective Pixel Replacement
Mode
defectivePixelReplacementMode Sets the mode for the defective pixel
replacement.
Ver. 1.04
Expert
DFNC
OnSemi Python
monochrome and
Sony 9M & 12M
Off Off Defective Pixel Replacement is disabled.
Active Active Defective Pixel Replacement is enabled.
Defective Pixel Replacement
Map Current Active Set
defectivePixelReplacementMapCurren
tActiveSet
Sets the defective pixel replacement set.
Ver. 1.04
Expert
DFNC
OnSemi Python
monochrome and
Sony 9M & 12M
Factory Map FactoryMap Sets the factory coefficient table as active.
User Map 1 UserMap1 Sets the User Map coefficient table as active.
Defective Pixel Replacement
Algorithm
defectivePixelReplacementAlgorithm Specifies the defective pixel replacement
algorithm.
Ver. 1.07
Expert
DFNC
OnSemi Python
monochrome and
Sony 9M & 12M
Method3: Neighboring Pixel Method3 This algorithm replaces a defective pixel with
a neighbor.
Noise Reduction Mode noiseReduction Sets the mode for the pixel noise reduction.
Ver. 1.06
Expert
DFNC
M/C 5100 &
M/C 4900 only
Off Off Noise Reduction is disabled.
Active Active Noise Reduction is enabled.
LUT Mode lutMode Sets the enable state of the selected LUT
module (Lookup Table).
Ver. 1.03
Expert
DFNC
Off Off Disables the LUT.
Active Active Enables the selected LUT module.
LUT Type lutType Displays the LUT type of the currently
selected Lookup Table.
Ver. 1.03
Expert
DFNC
Ver. 1.06
Available with
Bayer Color
firmware
User Defined UserDefined Uses the user programmable LUT.
Gamma Correction GammaCorrection Uses gamma LUT
Gamma Correction gammaCorrection Sets the gamma correction factor (i.e. inverse
gamma). The gamma correction is applied as
an exponent to the original pixel value.
(Min: 0.001, Max: 2.0, Increment: 0.001)
LUT Selector LUTSelector Selects which LUT to control and adjust
features.
Ver. 1.03
Guru
Luminance 1 Luminance1 Luminance 1 is under control
RED RED LUT Red is under control
Green Green LUT Green is under control
Blue Blue LUT Blue is under control
LUT Size lutSize Specify the LUT size of the selected LUT
(Lookup Table). Available choices are model
dependent.
Ver. 1.03
Guru
DFNC

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dalsa Genie Nano Series and is the answer not in the manual?

Dalsa Genie Nano Series Specifications

General IconGeneral
BrandDalsa
ModelGenie Nano Series
CategorySecurity Camera
LanguageEnglish

Related product manuals