200 • Operational Reference Nano Series GigE Vision Camera
Display Name Feature & Values Description
Device Version
& View
Metadata Mode ChunkModeActive Activates the inclusion of chunk data (metadata) in the
payload of the image.
Expert
False No chunk data.
True Chunk data included in payload
Chunk
Compatibility
Format
chunkCompatibilityMode Selects the format of the chunk data (metadata) in the
payload of the image.
Expert
DFNC
Sapera LT SaperaLT Metadata compatible with Teledyne DALSA Sapera LT 8.0.
Gen API GenAPI Metadata compatible with GenICam GenAPI.
Metadata
Selector
ChunkSelector Selects the specific metadata to control, when enabled.
Expert
OffsetX Add the OffsetX value used during the image acquisition
to the metadata attached to the image
OffsetY Add the OffsetY value used during the image acquisition
to the metadata attached to the image.
Width Add the Width value used during the image acquisition to
the metadata attached to the image.
Height Add the Height value used during the image acquisition to
the metadata attached to the image.
PixelFormat Add the PixelFormat value used during the image
acquisition to the metadata attached to the image.
ExposureTime Add the ExposureTime value used during the image
acquisition to the metadata attached to the image.
ExposureDelay Add the ExposureDelay value used during the image
acquisition to the metadata attached to the image.
Supported only in GenAPI compatibility mode.
(N/A for C4900 – 1.06)
cyclingPresetCurrentActiveSet Add the cyclingPresetCurrentActiveSet value used during
the image acquisition to the metadata attached to the
image.
Timestamp Copies the timestampValue value at the start of exposure
to the metadata attached to the image.
LineStatusAll Copies the LineStatusAll value at the start of exposure to
the metadata attached to the image.
Gain Add the Gain feature value used during the image
acquisition to the metadata attached to the image.
Counter1ValueAtReset Copies the value of the feature ”counterValueAtReset” at
the start of Frame Readout, to the Metadata attached to
the image. Supported only in GenAPI compatibility mode.
DeviceID Add the DeviceID value to the metadata attached to the
image.
DeviceUserID Add the DeviceUserID value to the metadata attached to
the image.
TestImageSelector Add the TestImageSelector value used during the image
acquisition to the metadata attached to the image.
BinningVertical Add the BinningVertical value used during the image
acquisition to the metadata attached to the image.
<ver. 1.03>
BinningHorizontal Add the BinningHorizontal value used during the image
acquisition to the metadata attached to the image.
<ver. 1.03>
Metadata Enable ChunkEnable Sets the enable state of the selected metadata. When
enabled, the metadata is included in the payload of the
image.
Expert
False Selected metadata Disabled
True Selected metadata Enabled
To Next Page
Loading...
Need help?
General
