Dalsa Genie Nano Series User Manual

230 • Operational Reference Nano Series GigE Vision Camera
Current IP set in LLA GevCurrentIPConfigurationLLA Controls whether the LLA (Link Local
Address) IP configuration scheme is
activated on the given network interface.
1.00
Guru
Current IP set in DHCP GevCurrentIPConfigurationDHCP Controls whether the DHCP IP
configuration scheme (Dynamic Host
Configuration Protocol) is activated on the
given network interface.
1.00
Guru
Current IP set in
PersistentIP
GevCurrentIPConfigurationPersistentIP Controls whether the PersistentIP
configuration scheme is activated on the
given network interface.
1.00
Guru
Primary Application IP
Address
GevPrimaryApplicationIPAddress Returns the IP address of the device
hosting the primary application. (RO)
1.00
Guru
Device Access Privilege
Control
deviceCCP Controls the device access privilege of an
application.
1.00
Guru
DFNC
Exclusive Access ExclusiveAccess Grants exclusive access to the device to
an application. No other application can
control or monitor the device.
Control Access ControlAccess Grants control access to the device to an
application. No other application can
control the device.
Control Access Switchover
Active
ControlAccessSwitchoverActive Enables another application to request
control access to the device.
Discovery Acknowledge
Delay
GevDiscoveryAckDelay Indicates the maximum randomized delay
the device will wait to acknowledge a
discovery command. (RO)
1.00
Guru
Current Heartbeat Timeout GevHeartbeatTimeout Indicates the current heartbeat timeout in
milliseconds.
1.00
Guru
GVCP Heartbeat Disable GevGVCPHeartbeatDisable Disables the GVCP (GigE Vision Control
Protocol) heartbeat monitor. This allows
control switchover to an application on
another device.
1.00
Expert
Communication Timeout GevMCTT Provides the transmission timeout value in
milliseconds.
1.00
Guru
Communication
Retransmissions Count
GevMCRC Indicates the number of retransmissions
allowed when a message channel message
times out.
1.00
Guru
Gev GVSP Extended ID
Mode
GevGVSPExtendedIDMode Enables the extended ID mode.
1.00
Expert
Fire Test Packet GevSCPSFireTestPacket When this feature is set to True, the
device will fire one test packet.
1.00
Invisible
Payload Size PayloadSize Provides the number of bytes transferred
for each image or chunk on the stream
channel.
1.00
Invisible
MAC Address GevMACAddress MAC address of the network interface.
1.00
Invisible
Current Camera IP
Configuration
GevCurrentIPConfiguration Current camera IP configuration of the
selected interface.
1.00
Invisible
LLA LLA Link-Local Address Mode
DHCP DHCP Dynamic Host Configuration Protocol
Mode. Network requires a DHCP server.
PersistentIP PersistentIP Persistent IP Mode (static)
Persistent IP Address GevPersistentIPAddress Persistent IP address for the selected
interface. This is the IP address the
camera uses when booting in Persistent IP
mode.
1.00
Invisible
Persistent Subnet Mask GevPersistentSubnetMask Persistent subnet mask for the selected
interface.
1.00
Invisible
Persistent Default Gateway GevPersistentDefaultGateway Persistent default gateway for the selected
interface.
1.00
Invisible
Primary Application Socket GevPrimaryApplicationSocket Returns the UDP (User Datagram Protocol)
source port of the primary application.
1.00
Invisible

Dalsa Genie Nano Series Specifications

General

Brand	Dalsa
Model	Genie Nano Series
Category	Security Camera
Language	English