Dell S4048T - Page 1027

To Next Page

To Previous Page

show system brief or show system stack-unit

2 On the new unit, number it the next available stack-unit number.

EXEC Privilege mode

stack-unit stack-unit-number renumber stack-unit-new-number

3 (OPTIONAL) On the new unit, assign a management priority based on whether you want the new unit to

be the stack manager.

CONFIGURATION mode

stack-unit stack-unit-number priority priority-number

4 Assign a stack group to each unit.

CONFIGURATION mode

stack-unitstack-unit-number stack-group stack-group-number

5 Connect the new unit to the stack using stacking cables.

Example of Adding a Stack Unit with a Conflicting Stack Number (Before and After)

The following example shows adding a stack unit with a conflicting stack number (before).

Dell#show system brief

Stack MAC : 00:01:e8:8a:df:e6

Reload Type : normal-reload

-- Stack Info --

Unit UnitType Status ReqTyp CurTyp Version Ports

----------------------------------------------------------------

1 Management online S4048-ON S4048-ON 9-10-0-0 72

2 Member not present

3 Member not present

4 Standby online S4048-ON S4048-ON 9-10-0-0 72

5 Member not present

6 Member not present

The following example shows adding a stack unit with a conflicting stack number (after).