The format to create a Dell Network OS AV pair for privilege level is shell:priv-lvl=<number> where
number is a value between 0 and 15.
Force10-avpair= ”shell:priv-lvl=15“
Example for Creating a AVP Pair for System Defined or User-Defined Role
The following section shows you how to create an AV pair to allow a user to login from a network access
server to have access to commands based on the user’s role. The format to create an AV pair for a user role is
Force10-avpair= ”shell:role=<user-role>“ where user-role is a user defined or system-defined role.
In the following example, you create an AV pair for a system-defined role, sysadmin.
Force10-avpair= "shell:role=sysadmin"
In the following example, you create an AV pair for a user-defined role. You must also define a role, using the
userrole myrole inherit command on the switch to associate it with this AV pair.
Force10-avpair= ”shell:role=myrole“
The string, “myrole”, is associated with a TACACS+ user group. The user IDs are associated with the user
group.
Role Accounting
This section describes how to configure role accounting and how to display active sessions for roles.
This sections consists of the following topics:
• Configuring AAA Accounting for Roles
• Applying an Accounting Method to a Role
• Displaying Active Accounting Sessions for Roles
Configuring AAA Accounting for Roles
To configure AAA accounting for roles, use the aaa accounting command in CONFIGURATION mode.
aaa accounting {system | exec | commands {level | role role-name}} {name |
default} {start-stop | wait-start | stop-only} {tacacs+}
Example of Configuring AAA Accounting for Roles
The following example shows you how to configure AAA accounting to monitor commands executed by the
users who have a secadmin user role.
Dell(conf)#aaa accounting command role secadmin default start-stop tacacs+
Applying an Accounting Method to a Role
To apply an accounting method list to a role executed by a user with that user role, use the accounting
command in LINE mode.
accounting {exec | commands {level | role role-name}} method-list
Example of Applying an Accounting Method to a Role
Security 944
To Next Page
Loading...
Need help?
General
