6 Configure the port for bridge-to-FCF links.
INTERFACE mode or CONFIGURATION mode
fip-snooping port-mode fcf
NOTE: To disable the FCoE transit feature or FIP snooping on VLANs, use the no version of a command;
for example, no feature fip-snooping or no fip-snooping enable.
Displaying FIP Snooping Information
Use the following show commands to display information on FIP snooping.
Table 29. Displaying FIP Snooping Information
Command Output
show fip-snooping sessions [interface
vlan vlan-id]
Displays information on FIP-snooped sessions on all
VLANs or a specified VLAN, including the ENode
interface and MAC address, the FCF interface and
MAC address, VLAN ID, FCoE MAC address and FCoE
session ID number (FC-ID), worldwide node name
(WWNN) and the worldwide port name (WWPN).
show fip-snooping config
Displays the FIP snooping status and configured FC-
MAP values.
show fip-snooping enode [enode-mac-
address]
Displays information on the ENodes in FIP-snooped
sessions, including the ENode interface and MAC
address, FCF MAC address, VLAN ID and FC-ID.
show fip-snooping fcf [fcf-mac-address]
Displays information on the FCFs in FIP-snooped
sessions, including the FCF interface and MAC
address, FCF interface, VLAN ID, FC-MAP value, FKA
advertisement period, and number of ENodes
connected.
clear fip-snooping database interface
vlan
vlan-id {fcoe-mac-address | enode-
mac-address | fcf-mac-address}
Clears FIP snooping information on a VLAN for a
specified FCoE MAC address, ENode MAC address, or
FCF MAC address, and removes the corresponding
ACLs generated by FIP snooping.
show fip-snooping statistics [interface
vlan
vlan-id| interface port-type port/
slot | interface port-channel port-
channel-number
]
Displays statistics on the FIP packets snooped on all
interfaces, including VLANs, physical ports, and port
channels.
clear fip-snooping statistics [interface
vlan vlan-id | interface port-type port/
slot | interface port-channel port-
channel-number
]
Clears the statistics on the FIP packets snooped on
all VLANs, a specified VLAN, or a specified port
interface.
show fip-snooping system
Displays information on the status of FIP snooping
on the switch (enabled or disabled), including the
number of FCoE VLANs, FCFs, ENodes, and currently
active sessions.
FIP Snooping 387
To Next Page
Loading...
