Command Output
show fip-snooping vlan
Displays information on the FCoE VLANs on which
FIP snooping is enabled.
Examples of the show fip-snooping Commands
The following example shows the show fip-snooping sessions command.
Dell#show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
FCoE MAC FC-ID Port WWPN Port WWNN
0e:fc:00:01:00:01 01:00:01 31:00:0e:fc:00:00:00:00 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:02 01:00:02 41:00:0e:fc:00:00:00:00 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:03 01:00:03 41:00:0e:fc:00:00:00:01 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:04 01:00:04 41:00:0e:fc:00:00:00:02 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:05 01:00:05 41:00:0e:fc:00:00:00:03 21:00:0e:fc:00:00:00:00
The following table describes the show fip-snooping sessions command fields.
Table 30. show fip-snooping sessions Command Description
Field Description
ENode MAC MAC address of the ENode .
ENode Interface Slot/port number of the interface connected to the
ENode.
FCF MAC MAC address of the FCF.
FCF Interface Slot/port number of the interface to which the FCF is
connected.
VLAN VLAN ID number used by the session.
FCoE MAC MAC address of the FCoE session assigned by the
FCF.
FC-ID Fibre Channel ID assigned by the FCF.
Port WWPN Worldwide port name of the CNA port.
Port WWNN Worldwide node name of the CNA port.
The following example shows the show fip-snooping config command.
Dell# show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FIP Snooping enabled VLANs
VLAN Enabled FC-MAP
---- ------- --------
100 TRUE 0X0EFC00
FIP Snooping 388
To Next Page
Loading...
