Dell S4048T User Manual

MIB Location
You can find Force10 MIBs under the Force10 MIBs subhead on the Documentation page of iSupport:
https://www.force10networks.com/CSPortal20/KnowledgeBase/Documentation.aspx
You also can obtain a list of selected MIBs and their OIDs at the following URL:
https://www.force10networks.com/CSPortal20/Main/Login.aspx
Some pages of iSupport require a login. To request an iSupport account, go to:
https://www.force10networks.com/CSPortal20/AccountRequest/AccountRequest.aspx
If you have forgotten or lost your account information, contact Dell TAC for assistance.
Standards Compliance 1277

Dell S4048T Specifications

General

Switching Capacity	1.44 Tbps
Rack Units	1U
Form Factor	Rack-mountable
Power Device	Internal power supply
Power Redundancy	Optional
Product Type	Switch
Jumbo Frame Support	Yes
Routing Protocol	OSPF, BGP, RIP, VRRP, PIM-SM, IGMP
Remote Management Protocol	SNMP, RMON, Telnet, SSH
Features	Quality of Service (QoS), Jumbo Frames Support, Virtual Route Redundancy Protocol (VRRP), VLAN support, sFlow, Multiple Spanning Tree Protocol (MSTP), Rapid Spanning Tree Protocol (RSTP), IPv6 support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ae
Dimensions (W x D x H)	17.3 in x 16 in x 1.7 in
Operating Temperature	0°C to 40 °C
Operating Humidity	10% to 90% (non-condensing)