Dell S4048T - Recovering from Learning Limit and Station Move Violations; NIC Teaming

station-move-violation shutdown-offending
• Shut down both the first and second port to learn the MAC address.
INTERFACE mode
station-move-violation shutdown-both
• Display a list of all of the interfaces configured with MAC learning limit or station move violation.
CONFIGURATION mode
show mac learning-limit violate-action
NOTE: When the MAC learning limit (MLL) is configured as no-station-move, the MLL will be
processed as static entries internally. For static entries, the MAC address will be installed in all port-pipes,
irrespective of the VLAN membership.
Recovering from Learning Limit and Station
Move Violations
After a learning-limit or station-move violation shuts down an interface, you must manually reset it.
To reset the learning limit, use the following commands.
NOTE
: Alternatively, you can reset the interface by shutting it down using the shutdown command and
then re-enabling it using the no shutdown command.
• Reset interfaces in the ERR_Disabled state caused by a learning limit violation or station move violation.
EXEC Privilege mode
mac learning-limit reset
• Reset interfaces in the ERR_Disabled state caused by a learning limit violation.
EXEC Privilege mode
mac learning-limit reset learn-limit-violation [interface | all]
• Reset interfaces in the ERR_Disabled state caused by a station move violation.
EXEC Privilege mode
mac learning-limit reset station-move-violation [interface | all]
NIC Teaming
NIC teaming is a feature that allows multiple network interface cards in a server to be represented by one
MAC address and one IP address in order to provide transparent redundancy, balancing, and to fully utilize
network adapter resources.
Layer 2 602