show cam-acl
Dell#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes) Next Boot(in block sizes)
1 block = 256 entries
L2Acl : 2 1
Ipv4Acl : 2 8(UdfEnabled)
Ipv6Acl : 0 2
Ipv4Qos : 2 0
L2Qos : 1 2
L2PT : 0 0
IpMacAcl : 0 0
VmanQos : 0 0
EcfmAcl : 2 0
FcoeAcl : 4 0
iscsiOptAcl : 0 0
ipv4pbr : 0 0
vrfv4Acl : 0 0
Openflow : 0 0
fedgovacl : 0 0
nlbclusteracl: 0 0
-- stack-unit 0 --
Current Settings(in block sizes) Next Boot(in block sizes)
1 block = 256 entries
L2Acl : 2 1
Ipv4Acl : 2 8(UdfEnabled)
Ipv6Acl : 0 2
Ipv4Qos : 2 0
L2Qos : 1 2
L2PT : 0 0
IpMacAcl : 0 0
VmanQos : 0 0
EcfmAcl : 2 0
FcoeAcl : 4 0
iscsiOptAcl : 0 0
ipv4pbr : 0 0
vrfv4Acl : 0 0
Openflow : 0 0
fedgovacl : 0 0
nlbclusteracl: 0 0
Dell#
4 Create a UDF packet format in the UDF TCAM table.
CONFIGURATION mode
udf-tcam name seq number
Dell(conf)#udf-tcam ipnip seq 1
5 Configure a UDF ID to parse packet headers using the specified number of offset and required bytes.
CONFIGURATION-UDF TCAM mode
key description udf-id id packetbase PacketBase offset bytes length bytes
Dell(conf-udf-tcam)#key innerL3header udf-id 6 packetbase innerL3Header offset
0 length 2
6 View the UDF TCAM configuration.
CONFIGURATION-UDF TCAM mode
Access Control Lists (ACLs) 173
To Next Page
Loading...
