EasyManua.ls Logo

Dell S4048T - Page 475

Dell S4048T
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Create a Multiple-Range
The following is an example of multiple range.
Example of the interface range Command (Multiple Ranges)
Dell(conf)#interface range tengigabitethernet 1/5 - 1/10 , tengigabitethernet
1/1 , vlan 1
Dell(conf-if-range-te-1/1,te-1/5-1/10,vl-1)#
Exclude Duplicate Entries
The following is an example showing how duplicate entries are omitted from the interface-range prompt.
Example of the Interface-Range Prompt for Duplicate Interfaces
Dell(conf)#interface range vlan 1 , vlan 1 , vlan 3 , vlan 3
Dell(conf-if-range-vl-1,vl-3)#
Dell(conf)#interface range tengigabitethernet 2/1 - 2/23 , tengigabitethernet 2/1
- 2/23 , tengigab 2/1 - 2/23
Dell(conf-if-range-te-2/1-23)#
Exclude a Smaller Port Range
The following is an example show how the smaller of two port ranges is omitted in the interface-range
prompt.
Example of the Interface-Range Prompt for Multiple Port Ranges
Dell(conf)#interface range tengigabitethernet 2/1 - 2/23 , gigab 2/1 - 2/10
Dell(conf-if-range-te-2/1-2/23)#
Overlap Port Ranges
The following is an example showing how the interface-range prompt extends a port range from the smallest
start port number to the largest end port number when port ranges overlap. handles overlapping port ranges.
Example of the Interface-Range Prompt for Overlapping Port Ranges
Dell(conf)#interface range tengigabitethernet 2/1 - 2/11 , gi 2/1 - 2/23
Dell(conf-if-range-te-2/1-23)#
Commas
The following is an example of how to use commas to add different interface types to a range of interfaces.
Example of Adding Interface Ranges
Dell(config-if)# interface range tengigabitethernet 5/1 - 23, tengigabitethernet
1/1 - 2
Dell(config-if-range-te-5/1-23,te1/1-2)# no shutdown
Dell(config-if-range-te-5/1-23,te1/1-2)#
Add Ranges
The following example shows how to use commas to add VLAN and port-channel interfaces to the range.
Example of Adding VLAN and Port-Channel Interface Ranges
Dell(config-if-range-te-1/1-1/2)# interface range Vlan 2 – 100 , Port 1 – 25
Dell(config-if-range-te-1/1-1/2-vl-2-100-po-1-25)# no shutdown
Interfaces 475

Table of Contents

Related product manuals